AutoFlex Primer Basecoat is a single component peelable base, designed for use as an initial layer to provide approximately 30% more adhesion to the substrate (such as chrome trims or wheels) AutoFlex Primer Basecoat must be Overcoated with AutoFlex Basecoat to continue functioning as intended.
AutoFlex Base FAQs
What Equipment Do I Need?
60+ gallon compressor w/ approximately 14 CFM.
RP Gravity Fed Gun with a 2.0mm or 2.5mm Tip Size
Application Guidelines
2.0 Fluid Tip:- Application Pressure: 18-20PSI. Apply one 50% wet coat allowing for 5 mins to flash followed by 8 further wet coats with adequate flash time as stated above.
2.5 Fluid Tip:- Application Pressure: 28-30 PSI. Apply one 50% wet coat allowing for 5 mins to flash followed by 4 further wet coats with adequate flash time as stated above.
Drying / Curing Time
As this is a Primer Basecoat and is used prior to AutoFlex Basecoat, the usual flash times before application is needed (10-15 minutes or until dry to a mattefinish).
