Enter HyperDip™ is the latest technology in peelable aerosol paints. HyperDip™ is still peelable like Plasti Dip, however improved in every way. HyperDip™ is perfect for your Wheels, Trim, Emblems, Mirrors or any small surface.

You will notice the benefits of the advanced HyperDip™ technology immediately:

A smoother, flatter, slicker finish

A stronger, stretchier coating

Easier to wet out and spray like a pro

Enhanced finishes and sheen right out of the canthe answer here

HyperDip™ can be applied over existing HyperDip™ if the existing product is in great condition. No tears, no texture, no stains.

How to apply HyperDip over previously applied HyperDip™: 

1. Wash the surface with soap and water, allow the surface to dry for 24 hours
2. Wipe the surface thoroughly with PreDip Spray, then wipe the surface thoroughly with isopropyl alcohol. 
3. Once all of those steps are completed, you can lay 2 wet coats of HyperDip™ on top and should have great results.

No, HyperDip™ is not compatible with traditional Plasti Dip or any other non-HyperDip coatings, so please do not combine or stack with any other products.

No, HyperDip™ is not compatible with the Glossifier™ Aerosols.

Yes! The Dip Coat™ Ceramic Spray is highly recommend to use over top of the HyperDip™ to help protect the surface. 

Yes! We highly recommend using the Brake Dust Professional™ to clean your wheels.

Please refer to the chart below

You always want to make sure your humidity level is 50% or below. HyperDip™ is extremely sensitive to humidity, as the humidity climbs, you will loose clarity & sheen. 

You would need to start with 4 tack coats and then apply 4-6 wet coats.

You want to wait 5-7 minutes between each dust coat and 15-25 minutes (depending on ambient temperature) between each wet coat.